재다 - 셀프 인테리어 자재 계산 도구

Fence/Fence Material Calculator

dog

Please check.

  • Verifying the boundary points is the most important step. Please be sure to check the cadastral map or boundary markers first to ensure you do not encroach on the boundaries with adjacent land.
  • The construction method varies depending on the ground conditions. For soil floors, foundation concrete pouring (embedded type] is required, while for concrete floors, it is installed using an anchor type.
  • If the ground has a significant difference in elevation (slope], stepped construction is required. Please note that in this case, you may need to order longer support posts.
  • Determine the location and dimensions of the entrance (main gate] in advance. To avoid material waste, you must exclude the width occupied by the gate from the panel quantity calculation.
  • For coastal or humid areas, you must choose products with reinforced zinc plating or powder coating to prevent corrosion and ensure a long lifespan.

How about this calculator?

Fence Quantity Calculator, Mesh Fence & Design Fence Material Calculation Guide

We accurately calculate the quantities of posts and panels, which are the most confusing aspects when installing mesh or designer fences. Prepare for perfect fence construction without ordering errors using a precision calculator that takes into account accessory materials based on the installation environment (soil, concrete] and even the span reduction when installing a gate.

Fence Quantity Calculation Formula

The key point of a fence is that the number of ‘posts’ is always one more than the number of ‘panels’.

Required span (plate] quantity
Number of panels required = (Total installation length - Gate width] ÷ Width per span
Required number of shareholders (pillars]
Number of columns required = Number of spans required + 1 (for continuous installation]

The number of pillars may be increased if a gate is installed or a section is interrupted.

Detailed Guide to Calculator Input Items

Please enter the appropriate figures for the site conditions to provide an accurate estimate.

1. Selection of Foundation/Construction Method

If the floor is concrete, you must choose anchor posts, and if it is soil or grass, you must choose foundation posts buried in the ground.

2. Total installation length (m]

Enter the total length of the section where the fence will be installed. If there are many bends, please enter the actual measured total.

3. Fence height and span width

The most commonly used standard specification is a width of 2,000mm. Please select a height ranging from 600mm to 2,000mm to suit your application.

4. Entrance (Front Gate] Settings

The fence panels will be omitted where the main gate will be installed. If you enter the number of gates to be installed, it will be automatically deducted from the quantity.

Mesh Fence Standard Specifications and Accessory Quantity Guide

Product height Product width Wire thickness Shareholder specifications Fastening parts (per span]
900 mm 2000 mm 3.5 ~ 4.0 mm Circular 76.1.1.4T 2 ~ 3 dog
1200 mm 2000 mm 3.5 ~ 4.0 mm Circular 76.1.1.4T 3 dog
1500 mm 2000 mm 3.5 ~ 4.0 mm Circular 76.1.1.4T 4 dog

Expert Practical Know-how & Checklist

Here are on-site tips to improve fence installation quality.

  • Precautions for Slope Construction

    For sloping terrain, 'terraced construction' is the standard. In this case, the trick is to order columns one step longer to match the height.

  • The Importance of Maintaining Column Spacing

    Do not erect all the pillars first; instead, position the pillars by placing the plates one by one to ensure a clean assembly without errors.

  • Checking paint quality

    Since it is frequently exposed to the outdoors, please check that the powder coating is uniform and that the welded areas have been properly rust-preventive before installation.

Frequently Asked Questions (FAQ]

  • Q. Can I purchase the pillars (shareholders] separately?
  • A. Yes, it is possible. If additional columns are required due to damage during construction or division of sections, you can purchase only the main posts and accessory sets separately.
  • Q. What is the required floor thickness for anchor-type installation?
  • A. A concrete layer of at least 100mm must be secured so that the anchor bolts are firmly fixed and the fence does not shake.
  • Q. How do you determine the size of the front gate?
  • A. Single gates (1m] are primarily used for pedestrian traffic, while double gates (3~4m] are used for vehicle traffic. Please select based on the installation space.